ABOUT US
Made by Hand. Meant to Remain.
Brassdoria creates architectural fixtures in solid brass and copper for kitchens, bathrooms and outdoor spaces where material, proportion and time matter. Designed in Astoria, New York. Handcrafted in Marrakech, Morocco.
Two Places. Two Disciplines. One Standard.
Brassdoria brings together two places and two disciplines that rarely meet.
The design begins in Astoria, New York — shaped by contemporary American interiors, architectural proportion and the demands of everyday function. Every dimension is considered before a single piece is made: spout reach, wall projection, handle relationship, the diameter of a rain head against the scale of the room it will live in.
The making takes place in Marrakech, Morocco, where brass and copper still pass through skilled human hands. Our fixtures are cast, shaped, finished and assembled in small batches by artisans working in a metalworking tradition measured in generations rather than production cycles.
The result is a collection made for spaces that value material, detail and time — architectural brass fixtures that belong to the room rather than competing with it, across kitchen, bathroom and shower collections.
We don't design against time. We design with it.
Five Principles Behind Every Piece
Solid metal, nothing disguised
Solid brass and solid copper — never plated, never thin alloy dressed up with a synthetic coating. The material is the product, not a finish applied to something lesser.
The finish becomes yours
Our unlacquered surfaces are intentionally alive. Light, water and touch gradually deepen the tone. No two pieces age in exactly the same way.
The human mark
Hammering, forming, polishing, finishing. Small variations in surface and tone are not imperfections to hide — they are evidence the piece was made by hand.
Proportion is part of performance
Scale, reach, projection, diameter and mounting position are designed as carefully as the mechanism inside. A fixture should complete a room, not compete with it.
Documented, not asserted
Dimensions, materials, connection sizes, installation requirements and care instructions published in full — so designers and homeowners can specify with confidence.
Solid Brass Fixtures vs. Mass-Produced Alternatives
Most fixtures on the market are produced in hours from plated alloys and lightweight metals. Ours are cast, finished and assembled by hand. The difference shows up on the first day — and every year after it.
| Feature | Brassdoria | Mass-Produced Fixtures |
|---|---|---|
| Material | Solid brass and solid copper throughout | Thin alloy or plated metal |
| Production | Hand-finished in small batches by named artisans | Fully automated factory output |
| Finish | Unlacquered living finish that deepens with use | Synthetic coating that fades, chips or peels |
| Design | Architectural proportion considered for the room | Standardised to a universal template |
| Longevity | Built to remain for decades | Frequently replaced within 5–7 years |
| Specification | Full dimensions, materials and installation published | Minimal technical documentation |
The Finish Becomes Yours
Unlacquered brass is not sealed against the world. It responds to it.
Freshly finished. Bright, warm and even across the surface, with the tool marks of hand-finishing visible in raking light.
Within weeks, the surface begins to respond to air, water and touch. Tone deepens first where hands rest most often.
Over months and years, a patina forms that belongs to your room alone — shaped by its light, its humidity and its daily use.
Every shower system, kitchen faucet and bathroom fixture we make behaves this way. This is a feature, not a flaw. For anyone who prefers a consistent appearance, brass can be polished back at any time — the material beneath is solid, so it never wears through the way a plated surface does.
For Designers, Architects and Builders
Brassdoria works directly with interior designers, architects, builders and hospitality teams specifying fixtures for residential and commercial projects. We provide project pricing, specification assistance, finish guidance and dedicated support for multi-unit orders.
If you are specifying brass or copper fixtures for a current project, we would be glad to help you select the right configurations, finishes and dimensions.
About Our Materials and Craft
What is unlacquered brass?
Unlacquered brass is solid brass left without a protective clear coating. Because the metal is exposed, it reacts naturally with air, moisture and touch, gradually developing a warm patina unique to its environment. Lacquered fixtures are sealed to stay uniform; unlacquered fixtures are designed to change.
Are Brassdoria fixtures solid brass or plated?
Solid. Our fixtures are made from solid brass and solid copper throughout — not plated alloy or coated base metal. This is why they can be polished, aged or restored without ever wearing through to a different material underneath. This applies across every collection, from shower systems to bathroom fixtures.
Where are Brassdoria fixtures made?
Every piece is designed in Astoria, New York, and handcrafted in Marrakech, Morocco, where our fixtures are cast, shaped, finished and assembled in small batches by skilled artisans.
How do I care for a living finish?
Wipe with a soft dry cloth to remove water spots. To let the patina develop, simply leave the surface alone. To return a piece toward its original brightness, a non-abrasive brass polish restores the tone — the solid material allows this to be repeated over the life of the fixture.
Will every piece look the same as the photographs?
Close, but never identical. Hand-finishing produces small variations in surface and tone, and unlacquered brass begins changing from the day it is installed. Each fixture is individual by nature.
Explore the Collection
Architectural shower systems, unlacquered brass faucets, copper outdoor showers and hand-finished details — designed to become part of the architecture.
Shop Shower Systems Shop Bathroom Shop KitchenMade by Hand. Meant to Remain.
Brassdoria creates architectural fixtures in solid brass and copper for kitchens, bathrooms and outdoor spaces where material, proportion and time matter. Designed in Astoria, New York. Handcrafted in Marrakech, Morocco.
Two Places. Two Disciplines. One Standard.
Brassdoria brings together two places and two disciplines that rarely meet.
The design begins in Astoria, New York — shaped by contemporary American interiors, architectural proportion and the demands of everyday function. Every dimension is considered before a single piece is made: spout reach, wall projection, handle relationship, the diameter of a rain head against the scale of the room it will live in.
The making takes place in Marrakech, Morocco, where brass and copper still pass through skilled human hands. Our fixtures are cast, shaped, finished and assembled in small batches by artisans working in a metalworking tradition measured in generations rather than production cycles.
The result is a collection made for spaces that value material, detail and time — architectural brass fixtures that belong to the room rather than competing with it, across kitchen, bathroom and shower collections.
We don't design against time. We design with it.
Five Principles Behind Every Piece
Solid metal, nothing disguised
Solid brass and solid copper — never plated, never thin alloy dressed up with a synthetic coating. The material is the product, not a finish applied to something lesser.
The finish becomes yours
Our unlacquered surfaces are intentionally alive. Light, water and touch gradually deepen the tone. No two pieces age in exactly the same way.
The human mark
Hammering, forming, polishing, finishing. Small variations in surface and tone are not imperfections to hide — they are evidence the piece was made by hand.
Proportion is part of performance
Scale, reach, projection, diameter and mounting position are designed as carefully as the mechanism inside. A fixture should complete a room, not compete with it.
Documented, not asserted
Dimensions, materials, connection sizes, installation requirements and care instructions published in full — so designers and homeowners can specify with confidence.
Solid Brass Fixtures vs. Mass-Produced Alternatives
Most fixtures on the market are produced in hours from plated alloys and lightweight metals. Ours are cast, finished and assembled by hand. The difference shows up on the first day — and every year after it.
| Feature | Brassdoria | Mass-Produced Fixtures |
|---|---|---|
| Material | Solid brass and solid copper throughout | Thin alloy or plated metal |
| Production | Hand-finished in small batches by named artisans | Fully automated factory output |
| Finish | Unlacquered living finish that deepens with use | Synthetic coating that fades, chips or peels |
| Design | Architectural proportion considered for the room | Standardised to a universal template |
| Longevity | Built to remain for decades | Frequently replaced within 5–7 years |
| Specification | Full dimensions, materials and installation published | Minimal technical documentation |
The Finish Becomes Yours
Unlacquered brass is not sealed against the world. It responds to it.
Freshly finished. Bright, warm and even across the surface, with the tool marks of hand-finishing visible in raking light.
Within weeks, the surface begins to respond to air, water and touch. Tone deepens first where hands rest most often.
Over months and years, a patina forms that belongs to your room alone — shaped by its light, its humidity and its daily use.
Every shower system, kitchen faucet and bathroom fixture we make behaves this way. This is a feature, not a flaw. For anyone who prefers a consistent appearance, brass can be polished back at any time — the material beneath is solid, so it never wears through the way a plated surface does.
For Designers, Architects and Builders
Brassdoria works directly with interior designers, architects, builders and hospitality teams specifying fixtures for residential and commercial projects. We provide project pricing, specification assistance, finish guidance and dedicated support for multi-unit orders.
If you are specifying brass or copper fixtures for a current project, we would be glad to help you select the right configurations, finishes and dimensions.
About Our Materials and Craft
What is unlacquered brass?
Unlacquered brass is solid brass left without a protective clear coating. Because the metal is exposed, it reacts naturally with air, moisture and touch, gradually developing a warm patina unique to its environment. Lacquered fixtures are sealed to stay uniform; unlacquered fixtures are designed to change.
Are Brassdoria fixtures solid brass or plated?
Solid. Our fixtures are made from solid brass and solid copper throughout — not plated alloy or coated base metal. This is why they can be polished, aged or restored without ever wearing through to a different material underneath. This applies across every collection, from shower systems to bathroom fixtures.
Where are Brassdoria fixtures made?
Every piece is designed in Astoria, New York, and handcrafted in Marrakech, Morocco, where our fixtures are cast, shaped, finished and assembled in small batches by skilled artisans.
How do I care for a living finish?
Wipe with a soft dry cloth to remove water spots. To let the patina develop, simply leave the surface alone. To return a piece toward its original brightness, a non-abrasive brass polish restores the tone — the solid material allows this to be repeated over the life of the fixture.
Will every piece look the same as the photographs?
Close, but never identical. Hand-finishing produces small variations in surface and tone, and unlacquered brass begins changing from the day it is installed. Each fixture is individual by nature.
Explore the Collection
Architectural shower systems, unlacquered brass faucets, copper outdoor showers and hand-finished details — designed to become part of the architecture.
Shop Shower Systems Shop Bathroom Shop KitchenMade by Hand. Meant to Remain.
Brassdoria creates architectural fixtures in solid brass and copper for kitchens, bathrooms and outdoor spaces where material, proportion and time matter. Designed in Astoria, New York. Handcrafted in Marrakech, Morocco.
Two Places. Two Disciplines. One Standard.
Brassdoria brings together two places and two disciplines that rarely meet.
The design begins in Astoria, New York — shaped by contemporary American interiors, architectural proportion and the demands of everyday function. Every dimension is considered before a single piece is made: spout reach, wall projection, handle relationship, the diameter of a rain head against the scale of the room it will live in.
The making takes place in Marrakech, Morocco, where brass and copper still pass through skilled human hands. Our fixtures are cast, shaped, finished and assembled in small batches by artisans working in a metalworking tradition measured in generations rather than production cycles.
The result is a collection made for spaces that value material, detail and time — architectural brass fixtures that belong to the room rather than competing with it, across kitchen, bathroom and shower collections.
We don't design against time. We design with it.
Five Principles Behind Every Piece
Solid metal, nothing disguised
Solid brass and solid copper — never plated, never thin alloy dressed up with a synthetic coating. The material is the product, not a finish applied to something lesser.
The finish becomes yours
Our unlacquered surfaces are intentionally alive. Light, water and touch gradually deepen the tone. No two pieces age in exactly the same way.
The human mark
Hammering, forming, polishing, finishing. Small variations in surface and tone are not imperfections to hide — they are evidence the piece was made by hand.
Proportion is part of performance
Scale, reach, projection, diameter and mounting position are designed as carefully as the mechanism inside. A fixture should complete a room, not compete with it.
Documented, not asserted
Dimensions, materials, connection sizes, installation requirements and care instructions published in full — so designers and homeowners can specify with confidence.
Solid Brass Fixtures vs. Mass-Produced Alternatives
Most fixtures on the market are produced in hours from plated alloys and lightweight metals. Ours are cast, finished and assembled by hand. The difference shows up on the first day — and every year after it.
| Feature | Brassdoria | Mass-Produced Fixtures |
|---|---|---|
| Material | Solid brass and solid copper throughout | Thin alloy or plated metal |
| Production | Hand-finished in small batches by named artisans | Fully automated factory output |
| Finish | Unlacquered living finish that deepens with use | Synthetic coating that fades, chips or peels |
| Design | Architectural proportion considered for the room | Standardised to a universal template |
| Longevity | Built to remain for decades | Frequently replaced within 5–7 years |
| Specification | Full dimensions, materials and installation published | Minimal technical documentation |
The Finish Becomes Yours
Unlacquered brass is not sealed against the world. It responds to it.
Freshly finished. Bright, warm and even across the surface, with the tool marks of hand-finishing visible in raking light.
Within weeks, the surface begins to respond to air, water and touch. Tone deepens first where hands rest most often.
Over months and years, a patina forms that belongs to your room alone — shaped by its light, its humidity and its daily use.
Every shower system, kitchen faucet and bathroom fixture we make behaves this way. This is a feature, not a flaw. For anyone who prefers a consistent appearance, brass can be polished back at any time — the material beneath is solid, so it never wears through the way a plated surface does.
For Designers, Architects and Builders
Brassdoria works directly with interior designers, architects, builders and hospitality teams specifying fixtures for residential and commercial projects. We provide project pricing, specification assistance, finish guidance and dedicated support for multi-unit orders.
If you are specifying brass or copper fixtures for a current project, we would be glad to help you select the right configurations, finishes and dimensions.
About Our Materials and Craft
What is unlacquered brass?
Unlacquered brass is solid brass left without a protective clear coating. Because the metal is exposed, it reacts naturally with air, moisture and touch, gradually developing a warm patina unique to its environment. Lacquered fixtures are sealed to stay uniform; unlacquered fixtures are designed to change.
Are Brassdoria fixtures solid brass or plated?
Solid. Our fixtures are made from solid brass and solid copper throughout — not plated alloy or coated base metal. This is why they can be polished, aged or restored without ever wearing through to a different material underneath. This applies across every collection, from shower systems to bathroom fixtures.
Where are Brassdoria fixtures made?
Every piece is designed in Astoria, New York, and handcrafted in Marrakech, Morocco, where our fixtures are cast, shaped, finished and assembled in small batches by skilled artisans.
How do I care for a living finish?
Wipe with a soft dry cloth to remove water spots. To let the patina develop, simply leave the surface alone. To return a piece toward its original brightness, a non-abrasive brass polish restores the tone — the solid material allows this to be repeated over the life of the fixture.
Will every piece look the same as the photographs?
Close, but never identical. Hand-finishing produces small variations in surface and tone, and unlacquered brass begins changing from the day it is installed. Each fixture is individual by nature.
Explore the Collection
Architectural shower systems, unlacquered brass faucets, copper outdoor showers and hand-finished details — designed to become part of the architecture.
Shop Shower Systems Shop Bathroom Shop KitchenMade by Hand. Meant to Remain.
Brassdoria creates architectural fixtures in solid brass and copper for kitchens, bathrooms and outdoor spaces where material, proportion and time matter. Designed in Astoria, New York. Handcrafted in Marrakech, Morocco.
Two Places. Two Disciplines. One Standard.
Brassdoria brings together two places and two disciplines that rarely meet.
The design begins in Astoria, New York — shaped by contemporary American interiors, architectural proportion and the demands of everyday function. Every dimension is considered before a single piece is made: spout reach, wall projection, handle relationship, the diameter of a rain head against the scale of the room it will live in.
The making takes place in Marrakech, Morocco, where brass and copper still pass through skilled human hands. Our fixtures are cast, shaped, finished and assembled in small batches by artisans working in a metalworking tradition measured in generations rather than production cycles.
The result is a collection made for spaces that value material, detail and time — architectural brass fixtures that belong to the room rather than competing with it, across kitchen, bathroom and shower collections.
We don't design against time. We design with it.
Five Principles Behind Every Piece
Solid metal, nothing disguised
Solid brass and solid copper — never plated, never thin alloy dressed up with a synthetic coating. The material is the product, not a finish applied to something lesser.
The finish becomes yours
Our unlacquered surfaces are intentionally alive. Light, water and touch gradually deepen the tone. No two pieces age in exactly the same way.
The human mark
Hammering, forming, polishing, finishing. Small variations in surface and tone are not imperfections to hide — they are evidence the piece was made by hand.
Proportion is part of performance
Scale, reach, projection, diameter and mounting position are designed as carefully as the mechanism inside. A fixture should complete a room, not compete with it.
Documented, not asserted
Dimensions, materials, connection sizes, installation requirements and care instructions published in full — so designers and homeowners can specify with confidence.
Solid Brass Fixtures vs. Mass-Produced Alternatives
Most fixtures on the market are produced in hours from plated alloys and lightweight metals. Ours are cast, finished and assembled by hand. The difference shows up on the first day — and every year after it.
| Feature | Brassdoria | Mass-Produced Fixtures |
|---|---|---|
| Material | Solid brass and solid copper throughout | Thin alloy or plated metal |
| Production | Hand-finished in small batches by named artisans | Fully automated factory output |
| Finish | Unlacquered living finish that deepens with use | Synthetic coating that fades, chips or peels |
| Design | Architectural proportion considered for the room | Standardised to a universal template |
| Longevity | Built to remain for decades | Frequently replaced within 5–7 years |
| Specification | Full dimensions, materials and installation published | Minimal technical documentation |
The Finish Becomes Yours
Unlacquered brass is not sealed against the world. It responds to it.
Freshly finished. Bright, warm and even across the surface, with the tool marks of hand-finishing visible in raking light.
Within weeks, the surface begins to respond to air, water and touch. Tone deepens first where hands rest most often.
Over months and years, a patina forms that belongs to your room alone — shaped by its light, its humidity and its daily use.
Every shower system, kitchen faucet and bathroom fixture we make behaves this way. This is a feature, not a flaw. For anyone who prefers a consistent appearance, brass can be polished back at any time — the material beneath is solid, so it never wears through the way a plated surface does.
For Designers, Architects and Builders
Brassdoria works directly with interior designers, architects, builders and hospitality teams specifying fixtures for residential and commercial projects. We provide project pricing, specification assistance, finish guidance and dedicated support for multi-unit orders.
If you are specifying brass or copper fixtures for a current project, we would be glad to help you select the right configurations, finishes and dimensions.
About Our Materials and Craft
What is unlacquered brass?
Unlacquered brass is solid brass left without a protective clear coating. Because the metal is exposed, it reacts naturally with air, moisture and touch, gradually developing a warm patina unique to its environment. Lacquered fixtures are sealed to stay uniform; unlacquered fixtures are designed to change.
Are Brassdoria fixtures solid brass or plated?
Solid. Our fixtures are made from solid brass and solid copper throughout — not plated alloy or coated base metal. This is why they can be polished, aged or restored without ever wearing through to a different material underneath. This applies across every collection, from shower systems to bathroom fixtures.
Where are Brassdoria fixtures made?
Every piece is designed in Astoria, New York, and handcrafted in Marrakech, Morocco, where our fixtures are cast, shaped, finished and assembled in small batches by skilled artisans.
How do I care for a living finish?
Wipe with a soft dry cloth to remove water spots. To let the patina develop, simply leave the surface alone. To return a piece toward its original brightness, a non-abrasive brass polish restores the tone — the solid material allows this to be repeated over the life of the fixture.
Will every piece look the same as the photographs?
Close, but never identical. Hand-finishing produces small variations in surface and tone, and unlacquered brass begins changing from the day it is installed. Each fixture is individual by nature.
Explore the Collection
Architectural shower systems, unlacquered brass faucets, copper outdoor showers and hand-finished details — designed to become part of the architecture.
Shop Shower Systems Shop Bathroom Shop Kitchen